Views: 0 Author: Site Editor Publish Time: 2021-09-30 Origin: Site
We know that solar modules have certain technical characteristics and installation requirements. The quality of solar modules and the cost of solar modules will directly determine the quality and cost of the entire solar module system. So what are the technical characteristics and installation requirements of solar modules? Let's go take a look next.
Here is the content list:
Technical characteristics of solar modules
Solar module installation requirements
The solar module array is composed of one or more solar cell modules. If there is more than one solar module, the current and voltage of the solar module should be the same to reduce the combined loss of series and parallel. The solar modules determine the total power of the solar module array based on the local solar radiation parameters and load characteristics. According to the voltage and current requirements of the designed solar module system, determine the number of solar module arrays in series and parallel. The solar module square array bracket is used to support the solar module. The structural design of the solar module square array should ensure that the solar module and the bracket are firmly and reliably connected, and the solar module can be easily replaced. The solar module array and support must be able to withstand the wind of 120 km/h without being damaged. The solar module bracket can be adjustable in inclination or installed at a fixed angle so that the solar module square array can obtain the maximum power generation in the design month (that is, the month with the worst average daily radiation amount).
All the fasteners of the solar module array must have sufficient strength to reliably fix the solar module on the array bracket. The solar array can be installed on the roof. However, the solar module square array bracket must be connected to the main structure of the building, and cannot be connected to the roof material. For a square array of solar modules installed on the ground, the minimum distance between solar modules and the ground should be more than 0.3 m. The bottom of the solar module column must be firmly connected to the foundation to be able to bear the weight of the solar module array and to withstand the design wind speed. For portable low-power power supplies, solar modules should be equipped with brackets for reliable placement.
To produce more and better solar modules and maintain the healthy development of the solar module market, the manufacturer of Anhui JF Solar Technology Co., Ltd. (JF Solar) has unique instructions in the installation of solar modules. To better develop the technical characteristics of solar modules, The manufacturer of Anhui JF Solar Technology Co., Ltd. (JF Solar) is conducting technical research and development of solar modules. If you are interested in solar modules, you can contact us, our website is https://www.jf-solartech.com/. We very much welcome you to cooperate with us.